325 Mesh Gangue Pulverizing Equipment: Price and Technical Specifications

We provide a wide range of mills — including Raymond mill, trapezoidal mill, vertical mill, ultrafine mill, and ball mill, obtained ISO9001 international quality certification, EU CE certification, and Customs Union CU-TR certification. Suitable for processing minerals such as limestone, phosphate, quicklime, kaolin, talc, barite, bentonite, calcium carbonate, dolomite, coal, gypsum, clay, carbon black, slag, cement raw materials, cement clinker, and more.

The discharge range of these mills can be adjusted to meet specific processing needs, typically from 80-400 mesh, 600-3250 mesh, and can achieve the finest particle size of up to 6000 mesh(D50).

If you are looking for a reliable grinding solution to turn stone or minerals into fine powder, please feel free to contact our online customer service.

325 Mesh Gangue Pulverizing Equipment: Price and Technical Specifications

When it comes to processing industrial by-products like gangue into valuable fine powders, achieving a consistent 325 mesh (approximately 45 microns) is a common and critical requirement across many industries. Selecting the right pulverizing equipment is paramount, as it directly impacts operational efficiency, product quality, and your bottom line. This article delves into the key technical specifications you should consider and highlights a premier solution for this specific application.

Key Considerations for 325 Mesh Gangue Grinding

Gangue, the waste rock surrounding mineral deposits, often contains valuable minerals or can be repurposed itself. Grinding it to 325 mesh unlocks its potential for use in construction materials, ceramics, and as a filler. The ideal equipment must handle its abrasive nature efficiently. Key factors include:

  • Feed Size: The maximum size of raw material the mill can accept.
  • Capacity (tph): The throughput rate, vital for production planning.
  • Energy Consumption: A major operational cost driver.
  • Wear & Maintenance: Resistance to abrasion and ease of part replacement.
  • Environmental Controls: Integrated dust collection and noise reduction.

Gangue material being fed into a grinding mill hopper

Recommended Solution: MW Ultrafine Grinding Mill

For operations focused on high-quality, ultra-fine powder production from gangue, our MW Ultrafine Grinding Mill stands out as an exceptional choice. It’s engineered for customers who need to make precisely controlled ultra-fine powder with operational reliability.

Technical Specs at a Glance:

  • Input Size: 0-20 mm
  • Capacity: 0.5 – 25 tph
  • Adjustable Fineness: 325 – 2500 meshes

Why it’s perfect for Gangue:

  • Higher Yielding, Lower Energy Consumption: Its newly designed grinding curves enhance efficiency, offering 40% higher capacity than jet mills and reducing system energy consumption by up to 70% compared to traditional options.
  • Precision Particle Control: The German-technology, cage-type powder selector ensures accurate separation, allowing you to reliably hit that 325-mesh target and even finer specifications with a screening rate of d97≤5μm.
  • Durability & Easy Maintenance: A revolutionary design eliminates rolling bearings and screws inside the grinding chamber. This means no worries about bearing failures or loose screws causing damage. External lubrication allows for 24/7 operation without shutdowns.
  • Eco-Friendly Operation: The integrated efficient pulse dust collector ensures no dust pollution, while silencers and noise elimination rooms keep operations within strict environmental standards.

Technical diagram showing the internal workings of the MW Ultrafine Grinding Mill

Understanding the Investment

The price of 325 mesh gangue pulverizing equipment varies significantly based on capacity, configuration, and technological features. While entry-level mills might seem attractive, investing in advanced technology like the MW Series often leads to a lower total cost of ownership. The savings from reduced energy bills, minimal downtime, and lower maintenance costs quickly justify the initial capital expenditure. For an accurate quote tailored to your specific project requirements, direct consultation with our technical sales team is recommended.

Another Strong Contender: LUM Ultrafine Vertical Grinding Mill

For operations requiring a slightly different approach, our LUM Ultrafine Vertical Grinding Mill is another top-tier option. It integrates grinding, grading, and transporting with exceptional efficiency.

Its Advantages:

  • Input Size: 0-10 mm
  • Capacity: 5 – 18 tph
  • Features advanced roller technology for higher yield rates and better product whiteness.
  • Its reversible structure allows for easy maintenance and quick roller checking.

Modern control room monitoring a grinding mill operation with digital displays

Conclusion

Selecting the right pulverizer for gangue is a strategic decision. By focusing on robust construction, energy efficiency, precise particle control, and environmentally sound operation, you ensure long-term profitability. Our MW Ultrafine Grinding Mill, with its proven track record and advanced feature set, is specifically designed to meet the challenges of grinding abrasive materials like gangue to 325 mesh and beyond. We encourage you to contact us to discuss how this technology can optimize your process and improve your final product.